🔍
Inline Water-Based PCBA Cleaning Machine DEZ-C1520

Inline Water-Based PCBA Cleaning Machine | DEZ-C1520

The DEZ-C1520 is an inline water-based PCBA cleaning machine for continuous cleaning after reflow, wave or selective soldering. PCBAs pass through chemical pre-washing, circulating spray washing, staged DI-water rinsing, air-knife separation and three-stage air drying.

The machine processes PCBAs up to 500 mm wide, 400 mm long and 80 mm high, with a maximum product weight of 10 kg. Conveyor speed is adjustable from 10 to 1500 mm/min to match the board structure, contamination level and required cleaning time.

Chemical Spray Washing | Staged DI-Water Rinsing | Three-Stage Air Drying

Glissez-déposez des fichiers, Choisir des fichiers à téléverser, ou Capturer avec votre appareil photo
Catégorie :
Partagez votre amour

Nettoyage continu de la PCBA après soudage

The DEZ-C1520 integrates washing, rinsing and drying into one continuous conveyor process. It is designed for production where PCBAs must be cleaned without loading and unloading separate batch chambers.

Upper and lower spray systems direct the cleaning liquid and DI water towards both sides of the assembly. The actual cleaning result depends on flux chemistry, component layout, spray access and the cleanliness requirement established for the product.

The machine can be positioned after reflow, wave or selective soldering and before cleanliness testing, conformal coating, inspection or final assembly.

Inline Water Based PCBA Cleaning Machine DEZ-C1520 Illustration of the Actual Work Area

Problems Solved by the PCBA Cleaning Machine DEZ-C1520

Flux and Ionic Contamination After Soldering

Compatible cleaning chemistry loosens flux and other process residue from the PCBA. The following DI-water stages remove dissolved contamination and remaining cleaning agent before drying.

Cleaning-Agent Carryover

Air-knife isolation between the chemical washing and DI-water rinsing sections removes liquid carried on the assembly. Collected cleaning liquid returns to the chemical tank, reducing contamination of the rinse section and unnecessary chemical loss.

Incomplete Rinsing

The C1520 combines DI-water pre-rinsing, circulating rinsing and a final rinse. Separate spray-pressure control for the upper and lower nozzles allows the process to be adjusted for different PCBA structures.

Residual Moisture Before Coating or Testing

One cold-air stage and two hot-air stages remove surface water after rinsing. Adjustable upper and lower air knives direct airflow towards the PCBA while circulating air is reused within the drying section.

Interrupted Batch Production

PCBAs move continuously through the complete process on the conveyor. This avoids repeated basket loading and unloading when the same or similar assemblies are produced continuously.
PCBA Cleaning Machine DEZ-C1520 Drainage and Flushing Diagram

DEZ-C1520 Cleaning Process

PCBA Infeed → Chemical Pre-Wash → Circulating Chemical Wash → Air-Knife Isolation → DI-Water Pre-Rinse → Circulating DI-Water Rinse → Final DI-Water Rinse → Cold-Air Stripping → Two-Stage Hot-Air Drying → PCBA Outfeed
The chemical section uses heated upper and lower spray systems to clean the assembly. Air-knife isolation then limits chemical carryover into the rinse section.
The PCBA passes through staged DI-water rinsing before entering the drying section. Conveyor speed, liquid temperature, spray pressure and operating alarms are managed through the PLC and touchscreen.
Demander un devis Plus de Machines de Nettoyage PCBA

DEZ-C1520 Technical Specifications

ParamètreDEZ-C1520
Type de machineInline water-based PCBA cleaning machine
Processus de nettoyageChemical washing, DI-water rinsing and air drying
Dimensions de la machineL5210 × W1760 × H1680 mm
Poids de la machineApproximately 2200 kg
Dimensions maximales de la PCBAW500 × L400 × H80 mm
Poids maximum du produit10 kg
Largeur du tapis à mailles600 mm, customisable
Vitesse du convoyeur10–1500 mm/min, adjustable
Machine-body materialAcier inoxydable SUS304
Conveyor and basket materialAcier inoxydable SUS316
Système de contrôlePLC and 10-inch touchscreen
Puissance installéeApproximately 100 kW
Puissance de fonctionnementApproximately 65–85 kW
AlimentationThree-phase 380 VAC, five-wire
Chemical-liquid consumption1.5–2.5 L/h
DI-water consumption5–10 L/min
DI-water inlet requirement1.0 m³/h
DI-water quality requirementAbove 15 MΩ
Chemical-wash spray pressure0–0.6 MPa, adjustable
DI-rinse spray pressure0–0.6 MPa, adjustable
Chemical-tank temperature25–75°C
Drying configurationOne cold-air stage and two hot-air stages
Air-knife adjustmentHeight and angle adjustable
Débit d'air d'échappement requis1200 CFM
BruitBelow 80 dB
Secondary filtration100 μm
Nozzle connectionQuick-connect design
Optional configurationCustom conveyor width and SUS316 product baskets with side, front or rear restraints can be developed according to the workpiece dimensions.

DEZ-C1520 Washing, Rinsing and Drying Systems

Chemical Pre-Wash and Circulating Wash
The chemical section includes upper and lower spray systems with independently adjustable pressure. A 7.5 kW stainless-steel pump supplies the circulating wash, while the cleaning-liquid temperature can be set between 25 and 75°C.
Air-Knife Isolation and Chemical Recovery
Two upper air knives and one lower air knife remove cleaning liquid before the PCBA enters the rinse section. Their height and angle can be adjusted according to the product profile.
Staged DI-Water Rinsing
The rinsing process includes a pre-rinse, a circulating DI-water rinse and a final rinse. The circulating rinse uses a 5.5 kW stainless-steel pump with independent upper and lower pressure regulation.
Three-Stage Air Drying
The drying section combines cold-air stripping with two heated-air stages. Adjustable upper and lower air knives remove water from both sides of the assembly.
Stainless-Steel Conveyor System
A 600 mm stainless-steel mesh belt or chain conveyor carries products through the cleaning process. Conveyor speed is continuously adjustable between 10 and 1500 mm/min.
Filtration, Piping and Maintenance
The circulation system uses two-stage filtration. The primary pull-out filter captures larger particles, while the secondary filtration specification is 100 μm.
PCBA Cleaning Machine DEZ-C1520 Spray Nozzle Flushing Diagram

DEZ-C1520 Cleaning Process

PCBA Infeed → Chemical Pre-Wash → Circulating Chemical Wash → Air-Knife Isolation → DI-Water Pre-Rinse → Circulating DI-Water Rinse → Final DI-Water Rinse → Cold-Air Stripping → Two-Stage Hot-Air Drying → PCBA Outfeed
The chemical section uses heated upper and lower spray systems to clean the assembly. Air-knife isolation then limits chemical carryover into the rinse section.
The PCBA passes through staged DI-water rinsing before entering the drying section. Conveyor speed, liquid temperature, spray pressure and operating alarms are managed through the PLC and touchscreen.
le nettoyage des résidus de flux des PCBA et de la contamination ionique

FAQs by DEZ-C1520 PCBA Cleaning

What does the DEZ-C1520 clean?

It is designed to remove compatible flux residue, dissolved ionic contamination, cleaning-agent residue and other post-solder process contamination from assembled circuit boards.

It is an inline conveyor machine. PCBAs move continuously through washing, DI-water rinsing and drying sections.

The technical specification lists a maximum product size of W500 × L400 × H80 mm and a maximum product weight of 10 kg.

Yes. The specified DI-water consumption is 5–10 L/min, with an inlet requirement of 1.0 m³/h. The stated water-quality requirement is above 15 MΩ.

The PCBA passes through one cold-air stripping stage followed by two hot-air drying stages. Upper and lower air knives can be adjusted for the product profile.

Provide the PCBA dimensions, weight, component layout, flux type, contamination, required throughput, cleanliness target and factory utility conditions. Sample PCBAs are recommended for process testing.

Envoyez vos exigences en matière d'équipement SMT

Contactez DEZ pour Machine de nettoyage PCBA, machine de soudure sélective, machines de nettoyage de pochoirs, inspection par rayons X, rework BGA, fours de refusion et équipement de manutention SMT.

Envoyez les dimensions de votre pièce, le problème de production et le débit requis pour recevoir une évaluation gratuite de l'application, une recommandation d'équipement et un devis de projet. Des tests d'échantillons gratuits sont disponibles pour les projets qualifiés.

Un spécialiste de l'équipement vous contactera dans l'heure pendant les heures d'ouverture.

Obtenez une recommandation gratuite et demandez un test d'échantillon
Email : [email protected]
Téléphone : +86 138 2338 9052

Glissez-déposez des fichiers, Choisir des fichiers à téléverser, ou Capturer avec votre appareil photo